Recent Posts

Converting Double Sink To Single With Garbage Disposal


Double sinks were common before the invention of dishwashers where the two parts were useful when washing and rinsing utensils. But in the new era with automated dishwashers, the need for double sinks is not much. This is especially when you have large dishes that need to be soaked, you might require to convert your double sink to a single with garbage disposal.

 You can convert a double sink to a single with garbage disposal by first getting rid of the old one and getting the correct sink the same type as the countertop. Remove everything that isn’t glued underneath the sink to create a working space. Place the sink as per the manual and attach the garbage disposal.

How To Convert A Double Sink Into Single With Garbage Disposal?

Get the Correct Sink

You should get a new sink and get rid of the old one.

To avoid the work of rebuilding the countertop, you should buy a sink of the same type as the counter. 

For instance, you should not buy a drop-in basin whereas your countertop is top-mounted. You will ease the work by replacing the sink without any adjustments.

Remove All the Parts

Disconnect everything underneath the sink that is not glued. You will require rags to secure the drain pipes. Position the sink as per the directions on the manual.

Attach the Garbage Disposal

Take a P-trap kit from one of the drain pipes to the disposal outlet. And then, you have to clip the other drain pipe.

If there is any leakage, you can call a plumber to fix the issue or replace the hardware with new ones.  

How To Install A Garbage Disposal On A Single-Bowl Sink?

If your single-bowl sink does not have a garbage disposal, you can follow the steps below to install one.

Requirements

  • A disposal Unit
  • Wire strippers
  • Screw Driver
  • Hammer
  • Utility Knife
  • A cloth
  • Pliers

Steps

  • Ensure that there is adequate room to fit the unit and the pipes underneath the basin line up properly. This will also make sure that there is enough working space.
  • Make sure there is electrical wiring below the sink to connect the disposal unit.
  • The circuit breaker must be turned off so that you can wire your garbage disposal. Using a non-contact electrical tester, ensure that all the power circuit is off. Turn off all the power circuits until you are certain that no electric currents.
  • Using the slip-joint pliers, disconnect the P-trap and drain the extension pipe from beneath the sink. Use a rag to clip the exposed drain to keep off a bad smell.
  • Using a putty knife, take off any old plumbers putty from the wall to ease installation.
  • Put the flange evenly into the sink bottom hole. Slip the gasket and backup ring to the flange open sleeve below the sink followed by the mounting ring and snap ring.
  • Tighten the screws properly for a secure fit and wipe any leftover plumbers putty that pressed out of the joint in the sink.
  • Using the wire nuts, join the wires and tuck them in a wire box, and shut it.
  • Place the disposal garbage on the mountain ring, all outlets should face towards the drain pipe. Then, fasten the disposal discharge tube firmly.
  • Lastly, use pliers to fasten all the couplers. Turn the circuit breaker on, if there is no leakage the disposal garbage will be working effectively.

In case you have a dishwasher, you can connect its drain pipes too. Just ensure that the couplers are well tightened.

Average Cost of Installing A Garbage Disposal On Single Bowl Sink

The cost of installing new garbage disposal on a single bowl sink will depend on the model you are purchasing.

Garbage disposals are available in a price range of $80-$200. You can choose to hire a skilled person to install it for you however, you will have to pay more

If you decide to hire a handyman and buy an average-priced unit, you will need around $250 more or less.

You can minimize the cost by doing it yourself and eliminating the cost of hiring a plumber. You do not have to be a professional to perform this task, you will only need a guideline.

How Do I Clean My Garbage Disposal Unit?

Use Ice and Citrus Wedges

Take a handful of ice cubes and a half and lemon and run them through the garbage disposal.

As the ice cubes crush they will help in washing the blades and the lemons will keep the bad odors away. You can also use citrus instead of lemon.

Pour Vinegar and Baking Soda

This method is used in many homesteads, it requires on to have to sprinkle some baking soda and add a cup of white vinegar into the disposal unit.

Let it bubble for at least five minutes and use hot water to rinse.

Tips To Maintain Your Garbage Disposal

 If you want to retain your garbage disposal in better working conditions, you need regularly maintain it by;

  • You should not turn on the water supply before the disposal unit is done with crushing. You should wait for around 15 seconds when the grinding has stopped.
  • Avoid using harsh chemicals like bleach and drain cleaners.
  • You should not keep your garbage disposal for long without using it to avoid corrosion.
  • Rinse your disposal unit for 30 seconds every time you turn it off.
  • Chop large pieces into smaller ones for faster grinding.

Why Is My Garbage Disposal Backing Up Into My Dishwasher?

This is a problem that is experienced by homeowners with a single-drain sink with disposal garbage and a dishwasher. This is where the waste from the garbage disposal unit enters the dishwasher via the drain hose that joins the dishwasher to the disposal garbage.

This occurs when the disposal unit clogs making the waste back up to the dishwasher. This problem can be avoided by pouring hot water once per week to help melt the clogged debris.

Conclusion

After converting your double sink to a single with the garbage disposal, you can now soak all your large pots and dishes with ease.

With a single sink, washing will be more fun than before. Remember to follow the maintenance advice to have your garbage disposal in better condition. 

15 Reasons Why No Water Coming Out Of Hot Side of Faucet


If you are washing the utensils, hands, or taking a shower and no water comes out of the hot side of the faucet can be a horrible situation. Lack of hot water in the house can lead to many inconveniences as it plays a major role in the day to day life.

Several reasons can lead to water not coming out of the hot side of the faucet like a rusty faucet, frozen pipes, faulty installation, and airlock pipes. It can also be a result of leaked or clogged pipes which leads to low water pressure, wrong timer setting, unwitting boiler restart, or problems with tap washers. You should not rush to call a plumber as some of the issues can be easily be fixed by checking if there is a power connection or if the water supply is suspended, if the main water valve is turned on and if every faucet is functioning or it is just one which is interfering with the faucets.

15 Reasons why No water is coming out of Hot Side of the Faucet

Rusty Faucet

Rusty faucets are normal. If the faucet gets rusty, the normal flow of water is interfered with. The rust accumulates around the inner sides of the faucet leading to blockage.

Frozen pipes

If you live in places that experience brutal winters, you will understand what frozen pipes can do. Frozen pipes can stop the flow of hot and cold water. They can also make the water to be lukewarm only.

The pipes should be thawed first to get the water flowing back normally

Airlocks in Pipes

Air can get trapped in the pipes altering the flow of hot water in the faucet it can lead to partial or total blockage of the pipes.

You can easily fix this by putting a horse pipe on the cold tap and joining it to the hot water tap and turning on the hot water tap. The water from the cold tap will pressure the airlock out. 

If the above method does not work, you will have to drain the whole system out which will require the help of an engineer.

Faulty Installation

If your water system was installed unprofessionally, it can lead to future issues. One of the issues can be the hot water from the boiler not reaching the faucet.

No Power Connection

Your gas or electric boiler can be disconnected from the power supply. You should always confirm that the power connection is on as someone might have switched it off.

Suspended Water Supply

The reason why hot water is not coming out of the hot side of the faucet can be that the water supply in your house has been suspended. It can be as a result of plumbing work going on in your neighborhood or just a mistake.

Leaked Water Pipes

Leaking pipes can reduce pressure especially when the water is dripping near the mainline. You should follow the water supply track, look where the pipes are leaking and dripping. A big leakage can stop water from coming out of the faucet. You should call a plumber if there are any leaks for assistance.

Check Cold Water

If there is no water coming out of the hot side of the faucet but the cold water faucet is fine, it can be an issue with the heater. Heater malfunction can be as a result of sediments building up, leaks, or the heater being unplugged.

You can try to fix this by flushing the water heater and allowing it to heat up then opening the hot side of the faucet. If the water does not heat up after flushing the heater you should call a plumber to help you determine the problem and assist in fixing it.

Clogged Pipes

If you have confirmed that the pipes are not leaking and the water is no hot water is coming out of the faucet, it might be that the pipes are clogged. The sediments can build in the pipes minimizing the water pressure or blocking the pipes completely.

You should call a plumber to inspect your pipes for any clogs.

Low Water Pressure

Low water pressure will make the water come off the faucet cold or lukewarm. Low water pressure can be initiated by clogged or leaking pipes.

Wrong Timer Setting

Boilers can fail to heat the water if the timer on the boiler is wrongly set. You should confirm whether the timer on the boiler is set right before opening the hot water faucet.

Check Every Faucet

You should check every faucet in the house to confirm if it is only one faucet with a problem or more than one. At times one faucet can block and interfere with the rest.

If you fail to identify the problem or don’t know how to go about it, call a plumber for assistance.

Check water main

It might not be a problem with the pipes or the boilers making the water not come out of the faucet, it can be that the water main is closed. If the main valve is closed, there will be no water coming out of any faucet.

Unwitting Boiler Restart

It is normal to experience power cuts in our homes, they make the boilers restart. When the power gets back, the boiler is reset to default.

 Problem with the Tap Washer

When taps get blocked, water will not come out of the faucet. This can be resolved by replacing the washer in the tap. You must close the source of water for that tap before you try to fix it.

If you do not know how to do it, hire a plumber to do the job.

Conclusion

There is no need for worries if there is no hot water coming out of the hot side of the faucet. There are several reasons that can lead to this problem. You will only have to identify the problem first to know if you can fix it yourself or you need professional assistance.

10 Problems With SmartCore Vinyl Flooring


Nowadays many homeowners are going for the Smartcore vinyl flooring, this is contributed by its beauty, style, and its cost which is cheaper compared to hardwood floors. Regardless of all its goodness, Smartcore vinyl flooring has its problems too.

Problems related to Smartcore Vinyl Flooring are that it is easily scratched, denting problems, peeling and cracking, chipping in the corners, and water damage. Furthermore, it is not environmentally friendly, prone to discoloration and stains, hard to install and repair and its warranty is limited.

In this article, you will learn more about problems related to Smartcore vinyl flooring and how you can deal with some of them.

10 Problems With Smartcore Vinyl Flooring

Easily Scratched

Many floorings are prone to scratching. Nevertheless, vinyl flooring is most susceptible to scratching. It loses its glow after getting scratched and it appears dull.

In many adverts, Smartcore is said to be tougher than other brands giving the potential buyers hopes that it will not scratch at all.

Vinyl flooring is easily scratched by heeled shoes and chair legs. To minimize the scratches, you should have indoor sleepers for you and your guests, this will help minimize the dirt entering your house. Also, avoid dragging chairs in the house.

If you are a pet owner, vinyl flooring will disappoint you as it is effortlessly scratched by cats’ and dogs’ paws. You should go for tougher flooring if you like pets.

Denting Problem

Not only is vinyl flooring prone to scratching, but also denting. This flooring is not suitable for a place with a lot of movements like a commercial place.

Smartcore vinyl flooring is not tough enough to withstand a lot of pressure.

Peeling and Cracking

Peeling and cracking is endless complaint by the customers. Over time, your vinyl flooring will start cracking and will look unattractive. The peeling makes it worse as it will leave the floor to damage and dirt will get trapped underneath the flooring.

 This problem is inevitable and you should be ready for it.

Chipped Corners

The corners of the Smartcore flooring will get chipped over time. This can be a result of poor installation methods.  

This can be avoided by keenness while installing it. Poor cleaning habits can lead to this problem too.

Water Damage

Though Smartcore advertises vinyl flooring to be waterproof, it has been proved that its underlayment can be damaged by moisture. You will be forced to buy underlayment separately, but this still does not offer a total guarantee that the flooring will not absorb moisture.

Discoloration & Stains

Smartcore vinyl flooring will readily absorb any food or drink making it stained and discolored. These stains are hard to come out of, but you can avoid this by wiping out the food or drink spills instantly before they get absorbed. Use a damp, clean cloth and wipe gently.

Other than food and drink spills, the vinyl flooring can be discolored by the sun. This is possible when bright sunlight penetrates through the window. To prevent this, you should put the shades down when there is bright sunlight and always leave them down when you are off to work.

Heat can also contribute to discoloration of the vinyl flooring so it’s advisable to avoid using a heat vent on the floor.

Not Environmental Friendly

Depending on the materials used to manufacture it, vinyl flooring will emit different levels of VOCs into the environment after some time. The emitted substances are toxic and can lead to respiratory issues in the future.

This problem can be prevented by buying the vinyl flooring from a qualified material source, you can also use an air purifier to help clean the air and make breathing easier when in the house.

 Installation

Smartcore vinyl flooring is hard to install contrary to the advert. It will require a person with prior know-how or an expert to install it, after all the company voids warranty if one never hired a professional to install it. This is ridiculous because even if you are perfect at installing floorings you will still be demanded to hire a professional.

Repair

Repairing damaged vinyl flooring is impossible, you cannot replace only the damaged or marked-up part only. You will have to remove the old flooring and put a new one.

 In the end, you will realize you never saved much by not buying the hardwood.

Limited Warranty

It is absurd how the Smatcore Company encourages its customers not to hire professionals to install the flooring yet they void the warranty if you never hired a professional to install it.

More so, the company will not cover any other problem detected after installation. The company will only cover for manufacturing defects noted before installation of the flooring but not after.

Compared to other brands, Smartcore will offer a guarantee of five years which is extremely short.

FAQ

Why Is My Vinyl Plank Flooring Separating?

Vinyl plank flooring will separate due to contraction and expansion in cold and hot weather. It can also separate due to the presence of moisture underneath and excessively dragging heavy objects around the house like furniture.

Is Smartcore Vinyl Flooring Scratch Resistant?  

Smartcore vinyl flooring is not scratch resistant as not seen in the adverts. It can effortlessly get scratched and dented compared to other brands.

Do You Need An Expansion Gap For Vinyl Flooring?

Vinyl flooring is sensitive to changes in temperatures thus it is advisable to leave nearly a ¼ inch around the perimeter of the floor. This will help create room for expansion when the temperatures are high.

Conclusion

There are a lot of problems with the Smartcore vinyl flooring which makes it not a preferred choice compared to other floorings in the market.  

The repair issue, limited warranty, scratching and denting easily, peeling and cracking, among others make it not the best choice even if it is a budget-friendly flooring.

Am certain you now understand the problems related to vinyl flooring and you can decide to avoid them or be prepared.

Why Is There a Dead Possum in My Yard?


Possums are harmless animals and many times people mistake them for being aggressive. Many times they are accused of killing the chicken, tipping the trash can, or even digging up the garden. These accusations are rarely true as they only clear the mess made by other animals and they end up carrying the blame. If you are taking a walk in your yard and come across a dead possum, you will have to wonder ‘why is there a dead possum in my yard?’

The reason why you found a dead possum in your yard is either he was looking for food and died out of hunger, he was infected, a scavenger attacked him, or he is playing dead for fear of attack.

 Read on to know why a possum might be in your yard, how to tell if a possum is dead or not, and how to get rid of a dead possum, and more.

What Are Possums Doing In Your Yard?

Possums are rarely seen in daylight, they normally linger around their habitat but mostly at night. If you find a possum in your yard at the day, it is starving and had to look for food, or he is playing dead.

A possum can play dead if he is caught unaware or is threatened.

A possum can also be in your yard because he starved to death or a scavenger attacked him at night.

What Happens When A Possum Plays Dead?

Possums play dead when they are caught unaware or are threatened, they do this so that the attacker can think they are dead and leave them alone.

When a possum is playing dead he will turn static, close his eyes or gaze into space and act like he is not breathing. He will also open his mouth with the tongue out, the slaver will run out of his mouth, and he will release his bowel. Even if you stab or push the possum he will not react, he will appear dead by all means.

How Long Can a Possum Play Dead

A possum can play dead from 40 minutes to a maximum of 4 hours. Playing dead is a compulsorily way of the possum dealing with shock. It cannot control the process in any way.. The duration of the comatose condition will be determined by how much the possum was shocked.

How To Tell If The Opossum Is Dead?

You can differentiate a dead possum from a playing dead possum. This can also get tricky as a playing dead possum smells like a dead possum.

You can know the dissimilarity between the two by checking if it is breathing or not. Additionally, you can check the temperature, if he is warm that means he is alive but if he is cold, he is as good as dead. To do all these you are required to touch the possum which is unhygienic, you should wear a pair of gloves.

You should be careful while touching the possum to avoid a scratch or a bite, grab his head and tail to minimize his chances of moving.

 To avoid all the risks associated with touching it, the best thing is to wait for an hour to four and observe if there will be any movement. If there is not even a single movement after four hours, you can declare the possum dead.

How Do I Dispose Of A Dead Possum In My Yard?

You should dispose of a possum after you are certain he is dead. Wear a pair of gloves and take the possum outside your compound, call a wildlife rehabilitator who is nearby and hand it over.

Wearing a glove while wearing a dead possum helps to practice general hygiene, it is said that dead possums carry deadly diseases but that’s just a myth.

Alternatively, you can put the dead possum in a plastic trash bag and seal it firmly. Place the plastic container into a garbage can with a lid. Ensure that the lid is firmly closed to avoid scavengers from making a mess of it.

Benefits Of Possums In Your Yard

You read that right, possums can be of benefit to your yard. Many times they are loathed in that they tip the garbage cans and make a mess of the compound. In reality, possums are opportunistic animals and they only clean the mess made by other animals.

Possums are not aggressive but they can be if attacked. You should not go near a frightened or attacked possum.

Possums can help keep your compound clean by eating;

  • crickets
  • beetles
  • slugs
  • rats
  • snails
  • over-ripe fruit
  • mice
  • remains of dead animals
  • poisonous snakes
  • Cockroaches 

How To Keep Possums Away From Your Yard

If you hate having possums in your yard you can follow these recommendations;

  1. Do not leave any pet food outside.
  2. Pick any over-ripe or rotten fruits in your garden.
  3. Burn all the nearby bushes, fill any holes on the concrete slab to destroy their hideouts.
  4. Ensure you lock the doors of your pet at night.
  5. Use possum repellants.
  6. Use the trapping method.

How Can You Help Opossums?

Having learned of the benefits and the nature of possums, the least you can do is to be their advocates. Possums face animal cruelty due to people’s perceptions about them. Make everyone around you aware of the benefits of possums to help put an end to their suffering.

If you come across a dead possum, you should assume he is playing dead and wait for four hours before disposing of it. If it is a young or injured possum, call a local wildlife rehabilitator straightaway.

Conclusion

Possums are not aggressive but they can be, a defense mechanism when threatened. Possums are beneficial and should not be killed ruthlessly.

Whenever you see a possum walking in your yard know that it is in search of food and for a dead possum, it either died out of hunger or attacked by animals, infections or it is playing dead.

Regardless of whether it is dead, you should give it time around four hours before concluding.

 I am sure at the moment you understand why there is a dead possum in your yard.

Should I Paint Walls Before Installing Kitchen Cabinets?


Kitchen remodeling can be a fun activity and, once you start, you cannot wait to see the transformation. When giving your kitchen a new look, you must decide on the paint and kitchen cabinets; whether you want the paint to blend in with the cabinets or the paint to pop, one must precede the other.

It is recommended that the painting should come first, then cabinet installation. This order is best especially if you are installing new kitchen cabinets. Painting your walls first ensures that the painting is done sleekly, without the hindrance of kitchen cabinets. Truth be told, painting with obstacles can be stressful.

Should I paint the ceiling and when?

If you are redoing your kitchen, this includes the ceiling too. The ceiling should not be left out even if it looks okay. This is because if you leave out the ceiling, the wall painting and the new cabinets might outshine your ceiling. To get uniformity in your new kitchen, you should also polish up on the ceiling.

The ceiling should be painted first before painting the walls and installing the cabinets. It should be the first painted before anything else. The main reason is to avoid the paint from dripping on the painted walls or the cabinets. To aid in neatness and to avoid a redo on the walls or cabinets, paint your ceiling first.

What comes after cabinets are installed?

Earlier on, we concluded that the ceiling should be painted first, then the walls come next and after that, you can install the cabinets. Maybe you are stuck and wondering what should come next after installing the cabinets. There are other things to be done after installing the cabinets during a kitchen makeover.

Adding the countertops follows after you have installed the cabinets. After this, you can install the backsplash tile. If you have kitchen appliances like the coffee maker or any other appliance, you can install them.

What about the paint touch-up?

It is important to do a paint touch-up after all these installations. Installations can mess up the paint a little and mess up that perfect look. That is why it is good to do a final touch-up on the walls once you are done with all the installations. You can use spray paint or regular painting during the final touch-up.

What happens if I paint after installing the cabinets?

It is not recommended to have painting after cabinets are installed. The painter will have to avoid the obstacles of the cabinets. The painting will take longer because one will have to round the cabinets and this could lead to some parts being missed as opposed to painting on a clear surface.

In addition, painting with cabinets on the wall could lead to accidents of paint patches getting on the new cabinets. This could mess up the whole look especially if the cabinets have a different color from the wall paint.

Should I paint behind the cabinet?

Maybe you are just doing a repaint on your kitchen walls and you are wondering if it is necessary to paint behind the cabinets. It is good to paint behind the cabinet for uniformity. However, if you need to spare some paint, you do not need to paint behind the cabinet.

If your walls are new and have not been painted again, you need to paint behind the cabinets. This prevents drywalls. Drywalls usually absorb moisture and this may bring odor into your kitchen. We must avoid that smell in the newly done kitchen.

Pros of painting behind the cabinet

You probably need some more convincing on why you should paint behind the cabinets. If you like changing things around your space, you should paint behind the cabinets. If you need to move the cabinets to a different corner or kitchen wall, you will have the freedom to do so without worrying about the patch you did not paint.

Spaces behind the cabinet walls are prone to moisture build-up and humidity because of the temperature changes. These spaces need extra care to avoid mold from building up. Stains can also appear in these spaces and black spots might appear. All this can be avoided through painting.

Paint protects the walls from moisture build-up, making the wall stain resistant. Paint also prevents mold and protects the cabinets from the odor that results from moisture and mold. This is one more advantage of painting behind the cabinets.

FAQs about Painting before Installing Kitchen Cabinets

How can I prep my walls for painting?

Dusting, cleaning, and drying

Remove dust particles to prevent them from sticking to wet paint. Remember to also remove the cobwebs if there are any. After dusting, clean the walls to remove any stubborn stains. Use soap and water as well as a cleaner to remove grease and other stains. After cleaning, dry the walls to remove any soap.

How should I choose paint for kitchen walls?

This depends on the look you want your kitchen to have. You choose between matt and gloss paint. Matt is easy to clean while gloss gives a shine to the walls. Your local paint provider has expert advice on the kind of paint that is best for your kitchen. Some providers offer special paint mixes for the kitchen.

Conclusion

Remodeling a kitchen comes in steps, from preparation to painting to cabinet installation and appliance installation. The final thing is a quick touch-up to perfect things. The ceiling should be painted first to avoid paint dripping. We have also mentioned that it is recommended for kitchen walls to be painted before installing the kitchen cabinets.

Painting the kitchen walls is easier when the space has been prepared prior to the painting day. We have discussed how to prepare the walls for painting and this can be done easily using your cleaner, warm water, and soap for stubborn greasy paint. Do not forget to dry the soapy remains on the walls. Remember, it is always good to paint behind the kitchen cabinets.

Related Posts:

Why Does My Ceiling Look Patchy After Painting? 6 Popular Causes


Compared to painting your walls, achieving a professional and evenly painted ceiling can be hectic. Most ceilings are at a height of 2.5 m above and controlling the rollers at this height can be difficult. As a result, you may find it difficult to apply another coating despite having uneven edges and thin spots. The poorly painted ceiling is a cause of a patchy look on the ceiling, which is not quite aesthetic.

Your newly painted ceiling can look patchy after painting because you applied thick paints, you did not give your paint time to cure before coating it afresh, over-rolling while painting, applying paint unevenly, or using limited paint. Also, the ceiling may become patchy if there are surface debris or you did not use a primer in your painting. However, the patchy look on a ceiling can be avoided by following the right procedure when painting.

Why Does My Ceiling Look Patchy After Painting: Common Causes

Challenges associated with painting your ceiling cannot be hidden from people’s eyes since they are very dominant and noticeable mistakes. Below are possible reasons why your ceiling looks patchy:

Not preparing the surface you will be painting

You should always ensure the surface you are working on is smooth and clean to have a satisfying painting job. In case your surface has any debris, cobwebs, or dirt, you may end up having a patchy ceiling if not well prepared. Suppose your ceiling is very rough, you will have to begin by smoothing the surface first.

To prepare the surface, begin by getting rid of all the debris from the ceiling. For the rough areas, you will have to sand down using a clean and damp cloth until the surface is leveled up. Wash your surface thoroughly and then rinse the soapy residue with clean water. Washing will get rid of the leftover grease and before you start painting let the surface dry completely.

Caution; A soapy and wet surface will contribute to having a patchy ceiling if not left to dry.

Problem with equipment

Using an old roller, painting with both a brush and a roller, or purchasing a new roller may result in a patchy look. Mostly, paint tends to dry and stick on our old rollers and brushes if not properly washed off. This makes it difficult to smoothly use it. Mixing painting equipment is also another issue. Besides the different types of equipment, also avoid using different manufacturing brands.

The best tool to use on your ceiling is a 12- inch microfiber roller. You should only use brushes and pads on the edges since using them for the whole ceiling will lead to a patchy look.

Using the wrong primer or lack of primer

It is not easy to paint ceilings, especially cutting corners. The condition grows more unfavorable if you fail to use primer and it will eventually lead to patchiness. Another contributing issue is the mixing of different paint that is, using both oil paint and latex at the same time.

It is prudent to invest your time and funds to achieve a perfect job. For best results, purchase quality paints and sealers or primers meant specifically for ceilings and are not affected by old paint.

Time-lapse

One coating is usually not enough for a good painting job. Your ceiling will require multiple coats. Therefore, you will have to give adequate time for curing and drying before applying another coat since rushing the process will only lead to a patchy finish.

The waiting time duration will be influenced by the type of paint, ventilation in the room, and the relative humidity. For latex paint, you will require about 4 hours to dry. Oil paints, on the other hand, will require about 24 hours.

Related: How long should concrete cure before framing?

Applying Inadequate or excess paint

Applying a very thick paint will lead to uneven settling and eventually, it will look patchy. Take note of the edges since it is where paint mostly accumulates. Alternatively, applying thin paint is also another problem that could cause a patchy look on the ceiling.

It is recommended to invest in good paint and quality equipment for better results. On top of that spread the paint evenly across your ceiling.

Wrong application and poor application skills

Visualization is one thing you must consider when it comes to painting. Therefore, you will require proper lighting if you want to avoid having under-painted sections. It is good to find a qualified expert to do the work. You will end up reducing the cost of repainting often.

Conclusion

You do not have to be trained to paint perfectly. However, you have to be patient, keen, and alert to achieve this. Painting the ceiling does not make it easier but with the right paint and tool, you are good to go.